You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
@tohojo requested changes on this pull request.
This is a good start! There are some details to fix below. Also, you'll need to add a proper commit message. The first line should be a oneline description of the change, prefixed by the system you are touching (so something like "metadata: Add parsing of WiFi status information". Then add a description of what your change does (a shortish paragraph is probably enough for this change), with an example of the output you are parsing embedded in the commit message. You'll also need to add a Signed-off-by tag, as the bot says.
When revising, you can rewrite the commit in your local git tree, and force-push it to the same branch; that will update this pull request directly, while still keeping the history clean.
Feel free to ask clarifying questions, of course :)
> @@ -514,3 +514,27 @@ def get_module_versions():
module_versions[m] = v
return module_versions
+
+def get_wifi_data(iface):
You'll also need to add appropriate calls to this function in record_metadata(); I'd suggest putting them along with the calls to get_ip_addrs() and get_gateways()
> @@ -514,3 +514,27 @@ def get_module_versions():
module_versions[m] = v
return module_versions
+
+def get_wifi_data(iface):
+ wifi_data = {}
+ unwanted_keys = ["Interface", "ifindex", "wdev", "wiphy"]
+ output = get_command_output("iw dev %s info" % iface)
+ if output is not None:
+ for line in output.splitlines():
+ parts = line.split()
This needs to discard empty lines first
> @@ -514,3 +514,27 @@ def get_module_versions():
module_versions[m] = v
return module_versions
+
+def get_wifi_data(iface):
+ wifi_data = {}
+ unwanted_keys = ["Interface", "ifindex", "wdev", "wiphy"]
+ output = get_command_output("iw dev %s info" % iface)
+ if output is not None:
+ for line in output.splitlines():
+ parts = line.split()
+
+ if parts[0] in unwanted_keys:
+ continue
+ k,v = parts[0], parts[1]
Since you're doing the split here, better to use the 'k' and 'v' variables further down instead of parts[0] and parts[1]
> @@ -514,3 +514,27 @@ def get_module_versions():
module_versions[m] = v
return module_versions
+
+def get_wifi_data(iface):
+ wifi_data = {}
+ unwanted_keys = ["Interface", "ifindex", "wdev", "wiphy"]
+ output = get_command_output("iw dev %s info" % iface)
+ if output is not None:
+ for line in output.splitlines():
+ parts = line.split()
+
+ if parts[0] in unwanted_keys:
+ continue
+ k,v = parts[0], parts[1]
+ if parts[0] == 'txpower':
+ v = float(parts[1])
+ if parts[0] == 'channel':
Please add a comment with an example of the line you are trying to parse with this
> +
+ if parts[0] in unwanted_keys:
+ continue
+ k,v = parts[0], parts[1]
+ if parts[0] == 'txpower':
+ v = float(parts[1])
+ if parts[0] == 'channel':
+ v = {}
+ v['number'] =int(parts[1])
+ v['band'] = int(parts[2].strip("("));
+ v['width'] = int(parts[5])
+ v['center1'] = int(parts[8])
+
+ wifi_data[k] = v
+
+ return wifi_data
Missing newline at the end of the file
> @@ -514,3 +514,27 @@ def get_module_versions():
module_versions[m] = v
return module_versions
+
+def get_wifi_data(iface):
+ wifi_data = {}
+ unwanted_keys = ["Interface", "ifindex", "wdev", "wiphy"]
+ output = get_command_output("iw dev %s info" % iface)
+ if output is not None:
+ for line in output.splitlines():
+ parts = line.split()
Also, you'll need to handle unwanted lines. On my system, the output looks like this:
Interface wlan0
ifindex 3
wdev 0x1
addr 98:de:ad:ca:fe:85
ssid myssid
type managed
wiphy 0
channel 36 (5180 MHz), width: 80 MHz, center1: 5210 MHz
txpower 22.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets
0 0 0 0 0 0 0 0 0
Your parser will choke on the bit at the bottom; I think it's probably fine if you just abort parsing when you get to the "multicast TXQ" line...
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or unsubscribe.