root@n1:/tmp/pycore.50542/n1.conf# flent -H 10.0.0.21 udp_flood --debug-error Started Flent 1.3.0 using Python 3.6.8. Starting udp_flood test. Expected run time: 70 seconds. WARNING: Found iperf binary (), but it does not have an --enhancedreports option. Not using. ERROR: Runner UDP upload failed check: No suitable Iperf binary found. Traceback (most recent call last): File "/usr/share/flent/flent/aggregators.py", line 121, in collect t.check() File "/usr/share/flent/flent/runners.py", line 1457, in check marking=self.marking) File "/usr/share/flent/flent/runners.py", line 1503, in find_binary raise RunnerCheckError("No suitable Iperf binary found.") flent.runners.RunnerCheckError: No suitable Iperf binary found. During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/share/flent/flent/__init__.py", line 59, in run_flent b.run() File "/usr/share/flent/flent/batch.py", line 617, in run return self.run_test(self.settings, self.settings.DATA_DIR, True) File "/usr/share/flent/flent/batch.py", line 515, in run_test res = self.agg.postprocess(self.agg.aggregate(res)) File "/usr/share/flent/flent/aggregators.py", line 233, in aggregate measurements, metadata, raw_values = self.collect() File "/usr/share/flent/flent/aggregators.py", line 123, in collect raise RuntimeError("Runner %s failed check: %s" % (n, e)) RuntimeError: Runner UDP upload failed check: No suitable Iperf binary found. I though it was because of the binary name, it was iperf3 so i renamed it to iperf but it seems Flent needs iperf 2? It's the one that has --enhancedreports option. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/tohojo/flent/issues/171