Flent-users discussion archives
 help / color / mirror / Atom feed
* [Flent-users] interpreting my RRUL results
@ 2020-06-16 17:58 Jeremy Marks
  0 siblings, 0 replies; only message in thread
From: Jeremy Marks @ 2020-06-16 17:58 UTC (permalink / raw)
  To: flent-users


[-- Attachment #1.1.1: Type: text/plain, Size: 1053 bytes --]

This rrul test was run in a Linux Mint VM on a computer directly connected to my Arris BGW210 DSL modem, carrying my AT&T provided service at 75/20.

My original plan was to analyze buffer bloat from machines behind my router that is behind this modem, in case my performance would increase with a Ubiquiti Edgerouter that supports shaping algorithms such as cake.
However, I thought I had better first see what impact the modem itself has on the  buffer bloat situation.

Below is the standard unscaled triple plot from rrul. It looks pretty awful to me, but I am not experienced in reading these.
I would be grateful for help in interpreting these graphs, and for any suggestions on what, if anything, I can do (buy an IQrouter, perhaps)?

Also, I would imagine that,  the best I could do with a traffic shaping secondary router would be to not make things any worse. Would that be correct?

Many thanks for any education and thoughts about what to do next.
JM



[A close up of a map  Description automatically generated]



jm


[-- Attachment #1.1.2: Type: text/html, Size: 3826 bytes --]

[-- Attachment #1.2: image002.jpg --]
[-- Type: image/jpeg, Size: 76176 bytes --]

[-- Attachment #2: Type: text/plain, Size: 151 bytes --]

_______________________________________________
Flent-users mailing list
Flent-users@flent.org
http://flent.org/mailman/listinfo/flent-users_flent.org

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-06-16 17:59 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-16 17:58 [Flent-users] interpreting my RRUL results Jeremy Marks

Flent-users discussion archives

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lists.flent.org/flent-users

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V1 flent-users flent-users/ https://lists.flent.org/flent-users \
		flent-users@flent.org
	public-inbox-index flent-users

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git